A comprehensive control of a wind generator system connected to a plant is looked at in this paper, where a formula has really been developed allowing a control framework that utilizes a four-leg inverter connected to the grid side to infuse the supplied power, in addition to function as an energetic power filter alleviating lots existing disturbances as well as boosting power top quality. A 4 wire system is considered with three-phase as well as additionally single-phase straight as well as also nonlinear whole lots. Throughout the link of the wind generator, the utility-side controller is created to make up the disruptions set off in exposure of receptive, nonlinear, and/or out of balance solitary as well as additionally intra-phase loads, in addition to providing energetic as well as receptive power as required. When there is no wind power provided, the controller is suggested to increase the power top-notch making use of the dc-link capacitor with the power converter connected to the grid. The main difference of the recommended approach about others in the compositions is that the advised control framework is based upon the traditional power concept fragmentations. This option uses decoupled power as well as additionally existing referrals for the inverter control, using really functional, critical, as well as effective capacities.

Keywords : Power quality, Grid connected system, triggered generation, inverter controller

Author : KORRABANDI PRAVEEN KUMAR, PURUSHOTTAM EDULAMUDI

Title : To Boost the Power Top Quality in Grid Connected Wind Power Manufacturing System Utilizing Outside Storage System

Volume/Issue : 2019;01(2)

Page No : 1-4

With every enhancement in Internet in terms of speed and bandwidth, IOT (Internet Of things) is taking the market on a new node and knocking the door with new opportunities of inventions. This paper talks about an energy saving electrical device Surveillance and Control system based on IOT.A large amount of energy is consumed by lighting appliances, so making improved efficiency and quick fault detection is a significant challenge. In this work, two different model approaches is followed depending on the nature of application. For small areas or confined premises IEEE 802.11 wireless technology is used where all the appliances is connected to a common Wi-Fi network. In the second model like street lamp pole where number of appliances grows only in one direction, wired configuration is used to avoid range issue.

Keywords : IOT data, Energy meter, units, cost, wifi network.

Author : MYLAPALLI NARAYANARAO, S.DEVAKARUN

Title : IOT BASED ELECTRICAL DEVICE SECURITY AND CONTROL SYSTEM

Volume/Issue : 2019;01(2)

Page No : 5-10

The uncollected waste material when the waste bin is full is a common problem nowadays. Thus, an efficient waste management for the waste material is essential in ensuring a clean and green surrounding environment. This paper presents an Internet of Things (IoT) based Smart Waste Collection Monitoring and Alert System to monitor the waste material at the selected site of garbage collection area. The system is implemented using an ultrasonic sensor which is connected to Arduino UNO as to monitor waste bin garbage level. In this system, waste bin depth level will be sent via Arduino Ethernet Shield with an Internet connection to the Ubidots IoT Cloud. The Ubidots store the collected waste bin level data into IoT database and display the waste bin depth level on online dashboard for real-time visualization. The Ubidots Event manager invokes a notification alert to garbage collector mobile phone via a SMS when the waste bin is nearly filled for immediate waste collection. Therefore, the waste collection became more effective and systematic.

Keywords : IOT data, Ultrasonic sensor, IR sensor, distance, wifi network.

Author : ANUSURI GANGADHARA, A V V SATYANARAYANA

Title : SMART WASTE COLLECTION SURVELLANCE AS WELL AS ALERT SYSTEM VIA IOT

Volume/Issue : 2019;01(2)

Page No : 11-16

Cyber-attacks on the Internet of Things (IoT) are growing at an alarming rate as devices, applications, and communication networks are becoming increasingly connected and integrated. When attacks on IoT networks go undetected for longer periods, it affects availability of critical systems for end users, increases the number of data breaches and identity theft, drives up the costs and impacts the revenue. It is imperative to detect attacks on IoT systems in near real time to provide effective security and defense. In this paper, we develop an intelligent intrusion-detection system tailored to the IoT environment. Specifically, we use a deep-learning algorithm to detect malicious traffic in IoT networks. The detection solution provides security as a service and facilitates interoperability between various network communications protocols used in IoT. We evaluate our proposed detection framework using both real-network traces for providing a proof of concept, and using simulation for providing evidence of its scalability. Our experimental results confirm that the proposed intrusion-detection system can detect real-world intrusions effectively.

Keywords : IOT data, smart homes, high efficient data communication.

Author : NARAHARISETTY SHASHANK REDDY , NAGARAJU P

Title : OVERSEE ASSAULT DISCOVERY SYSTEM FOR SMART HOME IOT DEVICES

Volume/Issue : 2019;01(2)

Page No : 17-23

Internet of Things has been widely applied in everyday life, ranging from transportation and healthcare to smart homes. As most IoT devices carry constrained resources and limited storage capacity, sensing data need to be transmitted to and stored at resource-rich platforms, such as a cloud. IoT applications need to retrieve sensing data from the cloud for analysis and decision-making purposes. Ensuring the authenticity and integrity of the sensing data is essential for the correctness and safety of IoT applications. We summarize the new challenges of the IoT data communication with authenticity and integrity and argue that existing solutions cannot be easily adapted to resource constraint IoT devices. We present two solutions called dynamic tree chaining and geometric star chaining that provide efficient and secure communication for the Internet of Things. Extensive simulations and prototype emulation experiments driven by real IoT data show that the proposed system is more efficient than alternative solutions in terms of time and space.

Keywords : IOT data, smart homes, high efficient data communication.

Author : AYYALASOMAYAJULA NAGA SAILAJA , BVVSKR PAVAN

Title : TOWARD SECURE AS WELL AS EFFECTIVE COMMUNICATION FOR THE NET OF DETAILS

Volume/Issue : 2019;01(2)

Page No : 24-30

A crankshaft is used to transform the reciprocating movement of the piston into rotary movement or vice versa. The crankshaft consists of the shaft components which revolve inside the number one bearings, the crankpins to the huge ends of the connecting rod are related, the crank palms or webs which connects the crankpins and the shaft factors.The crankshafts are subjected to surprise and fatigue masses. This fabric of the crankshaft needs to be hard and fatigue resistant. The commonplace substances used for the crankshaft are Carbon Steel or Nickel-Chrome-Moly alloy steel or Nickel-Chrome or specific cast-iron. The aim of the task is to format and production a crankshaft for a four-cylinder IC engine with the aid of the manner of using theoretical calculations in format vicinity for Aluminum alloys6061 and business enterprise grade. A 2D drawing is drafted for crankshaft from the calculations and a 3-D version is created inside the three-D modeling software utility software program CREO.

Keywords : 3D model, Crank shaft, CREO, Cylinder, Alloys 6061, fabric shaft.

Author : GOLLAPALLI SRINIVASA RAO, M.CH.RAMA RAO

Title : Modelling and Investigation of Four Wheeler Crank Shaft by Using Diverse Alloys

Volume/Issue : 2019;01(2)

Page No : 31-36